Apollo Passive Seismic Experiment Long-Period Event Catalog in 80-Column Card-Format Text File Explanation of Catalog Entries - rev. 1008c Columns Data ------- --------------------------------------------------------- 3 - 4 Year 6 - 8 Day of the year 10 - 13 Signal start time in hours and minutes 15 - 18 Signal stop time in hours and minutes; 9999 if the signal continues to the next event 20 - 35 Signal envelope amplitudes in mm measured on a standard compressed-scale plot. Z component is used for stations 11 and 12, and Y component is used for all the other stations. Standard compressed plot is produced by first taking the absolute value of the difference between consecutive long-period data points, summing them over 40 data points (approx. 6 s), and then plotting them at a scale of 157 digital units/cm in alternating polarities to give the appearance of a seismogram. Four columns are assigned to each of Apollo stations 12 (or 11), 14, 15 and 16. 37 - 40 Availability of seismograms in expanded time scale: 1 = Calcomp incremental plotter plot 2 = Versatec matrix plotter plot A single column is assigned to each of stations 12 (or 11), 14, 15 and 16. 42 - 45 Data quality code (single column for each station): 1 = no data available for the station 2 = noisy data 3 = signal is masked by another, larger event 4 = compressed plot is clipped (original digital data may not be clipped) 5 = see comments 6 = the time recorded with the data is computer- generated, and thus is not exact 47 - 76 Comments 77 Event type: A = classified (matching) deep moonquake M = unclassified deep moonquake C = meteoroid impact H = shallow moonquake Z = mostly short-period event L = LM impact S = S-IVB impact X = special type 78 - 80 Matching deep moonquake class --- Additional entries for levent.0704 --- 82 - 85 New deep moonquake identification, July 2004 A = deep moonquake with assigned number T = suspected long-period thermal moonquake with assigned number --- Additional entries for levent.1008 --- Deep moonquake events newly identified by Bulow et al. [JGR 110, E10003, doi:10.1029/2005JE02414, 2005; JGR 112, E09003, doi:10.1029/2006JE002847, 2007] have been added. For these events, columns 15-18 (signal stop time) are left blank and columns 20-35 (signal envelope amplitudes) contain -1. only to indicate at which station the signal was detected. --- Certain corrections were made to levent.1008, making a new version 1008c in December, 2018